Specifications:
- Swing: 15.75"
- Swing over cross slide: 12.2"
- Maximum cutting diameter: 8.27"
- Maximum turning length: 21.26"
- Distance between spindles: 37.80"
- Speed Range: 45 - 4,500 RPM
- Spindle bore: 2.44"
- Bar Capacity: 2"
- Spindle nose: A2-6
- Main spindle motor (0 min /. Continuous): 15 / 10 hp
- X-axis (upper / lower): 7.56" / 7.56"
- Z-axis (upper / lower): 27.561" / 27.561"
- Y-Axis (upper / lower): +/- 3.62"
- Turret tool positions upper turret (all live): 12
- Turret tool positions lower turret (all live): 12
- B-Axis travel (sub-spindle): 28.74"
- Rotary tool speed: 50 - 6,000 RPM
- Rotary tool motor (upper and lower): 5.4 hp
- Rapid traverse (X / Z / Y): 1181 / 1574 / 1024 IPM
- Sub-spindle rapid traverse: 1,574 IPM
Dimensions:
- Weight: 16,000 Lbs
- Length (not including the chip conveyor): 105"
- Width: 79"
- Heght: 85"
- Transformer Height (Sits on top of the machine): 16"
- Chip Conveyor extenbsion beyond end of machine: 56" / 69" Tall
- Chip Pan Width: 56"
Equipped With:
- OSP E-100L CNC with RS-232C port
- Assorted live and statc tool holders
- Parts Catcher
- Assorted spindle liners
- Transformer (480 Volts)
- ATS Collet Chuck on Main & Sub-Spindles
- Auto Touchsetter
- Barfeed Interface
- User Task II
- Parts Ejector
- Synchronous Tapping
- Helical Cutting
- Thermal Compensation
- Lap 4
- Nose Radius Compensation
- Auto Chamfering
- 3D Animation
- Spindle Orientation
- Torque Limiiter
- Tool Life Management
- Tool Wear Compensation
Commments:
- Built new in November, 2004 - Substantially refurbished in 2017
- Bar Feeder is not included
- Copies of repair descriptions can be provided on request
- With the new Z B axis all guides have been replaced
Video:
- https://rumble.com/v3wdov2-okuma-lt200-my-twin-star.html
2017 Repairs:
- Installed new ZA Axis Linear Guidies and Ways
- Installed new linear ways on Y, XA, & XB axes. New Wipers including door
- wipers. Two new pumps, New door interlock switch
2023 Repair:
- Replaced the ZB Linear Guides
|