Specifications:
- Swing over bed: 30.3"
- Swing over carriage: 23.2"
- Distance between centers: 44.7"
- Maximum turning diameter: 22.0"
- Maximum turning length: 38.5"
- Spindle speed: 20 - 2,000 RPM
- Spindle nose: ASA-A2-11
- Draw tube I.D.: 4.62"
- Spindle bore diameter: 5.20"
- AC Spindle Motor (30 min.): 50 HP
- Spindle speed ranges: 2
- Maximum spindle torque: 2,039 ft-lbs.
- Minimum programming angle (degrees): .001
- Rapid traverse rate (RPM): 100
- X axis travel: 14.3"
- Z axis travel B: 43.5"
- Angle of slant bed: 45 degrees
- X axis guideway span: 14.2"
- Z axis guideway span: 16.5"
- Tailstock guideway span: 11.8"
- X axis rapid traverse rate: 550 IPM
- Z axis rapid traverse rate: 790 IPM
- X / Z axis ball screw diameters: 1.6" / 2.0"
- Maximum X axis feed thrust: 4,970 lbs.
- Maximum Z axis feed thrust: 6,870 lbs.
- Number of tools: 12
- Number of live tool positions: 12
- Turning tool shank size: 1.0"
- Boring bar diameter: 2.5"
- Turret index time (next station): 0.25 sec
- Turret index time (180ยง opposing stations): 2.1 secs
- Tool selection: Bi-directional
- Rotating tool RPM: 3,000
- Rotating tool HP: 10
- Rotating tool torque: 70.5 ft-lbs.
- Rotating tool type: BMT 75
- Rotating tool collet type: ER40
- Maximum collet ID: 1.0"
- Tailstock quill diameter: 4.7"
- Tailstock quill stroke (programmable): 4.7"
- Maximum tailstock quill thrust / max. hydraulic pressure: 3,210 lbs. / 580 PSI
- Tailstock body stroke (programmable): 39.4"
- Tailstock spindle taper (built-in type): MT #5
- Coolant pump pressure: 65 PSI
- Coolant pump motor: 1.2 HP
- Coolant tank capacity: 48 gal.
Equipped With:
- Fanuc 21iTB control
- Digital AC spindle and servo drives
- .001 degree spindle indexing
- Turbo chip conveyor with variable speed drive and 42" discharge height
- Long stroke hydraulic actuator with 4.62" hole (1.97" stroke)
- Bi-directional turret with Daikin Index Motor
- Hydraulic tailstock with programmable body and quill
- MT#5 dead center (tailstock has live spindle)
- Automatic tool setter
- Programmable high / low chucking pressure
- Complete set of tool holders for turret
- - 2 pcs. Eppinger Preci-Flex ready X-axis (straight) milling heads (PN: 7.071.810)
- - 1 pc. Eppinger Preci-Flex ready Z-axis (angular) milling head (PN: 7.071.835)
- - 1 pc. Eppinger Preci-Flex ER40 collet chuck adapter (PN: 4001-0091)
- - 1 pc. Eppinger Preci-Flex 1" Weldon type end mill holder (PN: 4003-0120)
- - 1 pc. Eppinger Preci-Flex shell mill adapter with 3/4" arbor (PN: 4007-0241)
- - 3 pcs I.D. tool holders
- - 1 pc I.D. tool holder w/ U drill cap
- - 6 pcs. straight shank 2.5" OD bushings (5/8", 3/4", 1", 1-1/4", 1-1/2", and 2" I.D.)
- - 5 pcs. OD turning tool holders
- - 1 pc. face tool holder
- Vogel automatic metered lubrication system
- 65 PSI multi-stage coolant pump
- Daewoo Tool Monitoring System
- NSK high precision double-nut ball screws
- NSK class P4 angular thrust bearings
- NTN class P4 spindle bearings
- Way lube recovery system
- Parker Hannifin hydraulic solenoids, flow control and reducing valves
|
