2013 Haas VF-3, Machine # 9162

Table:

• Table Size: 48" x 18.0"
• Maximum Table Load: 3500 LBS
• T-Slot Width: 0.630"
• T-Slot Center Distance: 3.15"
• Number of Std T-Slots: 5

Travels:

• X-Axis Travel: 40"
• Y-Axis Travel: 20"
• Z-Axis Travel: 25"
• Spindle Nose to Table (Min to Max): 4.2" to 29.2"

Spindle:

• Spindle Speeds Minimum - Maximum: 8100 RPM
• Spindle Taper: CT 40 Taper
• Main Motor (30 min. / cont.): 30.0 HP
• Max. Torque: 90 ft-lbf @ 2000 rpm
• Max. Torque w/optional Gearbox: 250 ft-lbf @ 450 rpm

Tool Changer:

• Tool Changer Positions: 20 ATC

Speeds:

• Rapid Traverse (XYZ): 1000 IPM
• Maximum Cutting Rate: 650 IPM

Axis Motor:

• Thrust (XY / Z): 2550 / 4200 LBF
• Max. Tool Diameter (Full): 3.5"
• Max. Tool Weight: 12 Lbs
• Tool-to-Tool (avg): 4.2 seconds
• Chip-to-Chip (avg): 4.5 seconds

General:

• Coolant Capaacity: 55 gallons

Air:

• Air Required: 4 scfm @ 100 psi
• Inline Air Hose: 3/8"
• Coupler (Air): 3/8"
• Air Pressure Minimum: 80 psi

Dimensions:

• Domestic Pallet: 152" x 102" x 109"
• Export Pallet: 131" x 92" x 101"
• Weight: 13,500 Lbs
• Domestic Pallet w/Conveyor: 152" x 102" x 109"
• Export Pallet w/Conveyor: 153" x 92" x 101"
• Weight w/Conveyor: 13800 lb
• Domestic Pallet w/50+1 SMTC: 152 in 102 in 127 in
• Export Pallet w/50+1 SMTC: 131 in 92 in 101 in
• Weight w/50+1 SMTC: 13800 lb
• Domestic Pallet w/Conveyor & 50+1 SMTC: 152 in 102 in 127 in
• Export Pallet w/Conveyor & 50+1 SMTC: 153 in 92 in 101 in
• Weight w/Conveyor & 50+1 SMTC: 13800 lb

Electrical:

• Input AC Voltage (3 Phase) - Low: 220 VAC
• Full Load Amps (3 Phase) - Low: 70 A
• Input AC Voltage (3 Phase) - High: 440 VAC
• Full Load Amps (3 Phase) - High: 35 A

Equipped With:

• Haas 4th Axis Rotary Table (can be removed if requested)
• Probe