2011 Haas VF-3, Machine # 9159

Table:

• Table Size: 48" x 18"
• Maximum Table Load: 3500 Lbs

Travels:

• X-Axis Travel: 40"
• Y-Axis Travel: 20"
• Z-Axis Travel: 25"
• Spindle Nose to Table: 4" - 29"

Spindle:

• Spindle Speeds: 15,000 RPM
• Spindle Taper: 40 Taper
• Main Motor: 20 HP
• Max Torque: 75 ft-lb @ 1400 rpm
• Max Torque w/opt Gearbox: 250 ft-lb @ 450 rpm

Tool Changer:

• Tool Changer Positions: 20 ATC
• Max Tool Diameter (full): 3.5"
• Max Tool Weight: 12 lb
• Tool-to-Tool (avg): 4.2 sec
• Chip-to-Chip (avg): 4.5 sec

Rapids:

• Rapid Traverse (X, Y & Z ): 1000 IPM
• Feed Rate: 650 IPM

Accuracy:

• Positioning (ñ): 0.0002"
• Repeatability (ñ): 0.0001"

General:

• Weight (approx.): 12500 lb
• Air Required: 4 scfm, 100 psi
• Coolant Capacity: 55 gal
• Power (options may increase requirement): 195-260 VAC/50 A
• : 354-488 VAC/30 A

Equipped With:

• Haas Control
• Side Mount Tool Changer
• Rigid Tapping
• Flood Coolant
• 1MB memory
• Haas intuitive programming system
• High speed machining
• Macros
• Rotational & scaling
• Software version m17.03a
• Tool life management
• Chip auger with chip chute
• Remote jog handle