1994 Citizen E-32, Machine # 9123

MAIN SPINDLE:

• TURNING DIAMETERS: 1.26"
• TURNING LENGTHS: 12.6"
• COLLET TYPE/CAPACITY: TF37/1.260"
• BAR CAPACITY: 1.26"
• NOSE: CITZEN
• BORE: 1.5"
• SPEED: 130 - 6000 RPM
• DRIVE MOTOR: 10 HP
• RANGE: 1
• INDEX INCREMENT: 0.001 Degrees

SUB-SPINDLE:

• TURNING DIAMETERS: 1.26"
• TURNING LENGTHS: 12.5"
• COLLET TYPE/CAPACITY: TF37/1.260"
• NOSE: CITZEN
• SPEED: 150 - 5000 RPM
• DRIVE MOTOR: 1.0 HP
• INDEX INCREMENT: 2.5 Degrees

TURRETS:

• NUMBER OF TURRETS: Two (2)
• MAX. TURNING TOOLS PER TURRET: Ten (10)
• MAX. ROTARY TOOLS: Ten (10)
• TOOL SHANK SIZE - SQUARE: 0.75"
• TOOL SHANK SIZE - ROUND: 1.000"
• TOOL SHANK SIZE - ROTARY: 0.375"

ROTARY TOOLS:

• HORSE POWER (30 MIN.): 0.7 HP
• SPEED RANGE: 225 - 4460 RPM
• ON-CENTER MILL DRILL: Standard
• WITH C AXIS: Standard
• OFF-CENTER MILL DRILL: Standard

GENERAL:

• MAX. NUMBER OF SIMULTANEOUS CUTTING TOOLS: Two (2)
• MACHINE NET WEIGHT: 8800 Lbs
• WIDTH: 61"
• HEIGHT: 63"

AXIS:

• X1 TRAVELS: 1.26"
• X1 TRAVERSE RATE: 472 IPM
• Z1 TRAVELS: 12.6"
• Z1 TRAVERSE RATE: 630 IPM
• C1 TRAVELS: 360 Degrees
• C1 TRAVERSE RATE: 167 RPM
• X2 TRAVELS: 1.26"
• X2 TRAVERSE RATE: 472 IPM
• Z2 TRAVELS: 12.6"
• Z2 TRAVERSE RATE: 630 IPM
• Z3 TRAVELS: 12.6"
• Z3 TRAVERSE RATE: 630 IPM

Equipped With:

• Mitsubishi Cincom Control
• Iemca CNC boss 542 Magazine Bar Feeder
• Chip Conveyor