Capacity:
- Chuck Size: 12"
- Swing Over Bed Ways: 25"
- Swing Over Cross Slide: 15"
- Distance Between Centers: 118"
Spindle:
- Speeds (2 ranges): 1-500 and 2-1850 rpm
- Bore: 5.51'
- Nose: Camlock D1-11
- Main Motor: 25 HP
- Maximum torque at the spindle: 2800NW
- Front bearing: 10'
Turret:
Tailstock:
- Stroke of Quill: 6"
- Quil Diameter: 3.5'
- Quill Taper: MT 5
Rapids:
- Rapid Traverse (X & Z ): 393.7 IPM
Feeds:
- Programmable Feed Rate: 0.19 - 125.9 IPM
Torque:
- Cross feed torque: 2,248 Lbs-Force
- Longitudinal feed torque: 3,372 Lbs-Force
Dimensions:
- Floor Space (L x W): 185' x 88"
- Weight (approx.): 12,320 LBS
- Bed Width: 17"
Capacity:
- Chuck Size: 12"
- Swing Over Bed Ways: 25"
- Swing Over Cross Slide: 15"
- Distance Between Centers: 118"
Spindle:
- Speeds (2 ranges): 1-500 and 2-1850 rpm
- Bore: 5.51'
- Nose: Camlock D1-11
- Main Motor: 25 HP
- Maximum torque at the spindle: 2800NW
- Front bearing: 10'
Turret:
Tailstock:
- Stroke of Quill: 6"
- Quil Diameter: 3.5'
- Quill Taper: MT 5
Rapids:
- Rapid Traverse (X & Z ): 393.7 IPM
Feeds:
- Programmable Feed Rate: 0.19 - 125.9 IPM
Torque:
- Cross feed torque: 2,248 Lbs-Force
- Longitudinal feed torque: 3,372 Lbs-Force
Dimensions:
- Floor Space (L x W): 185' x 88"
- Weight (approx.): 12,320 LBS
- Bed Width: 17"
General:
Comments:
- Siemens 840D Conversational Control
- 2 steady rests 15.1" capacity
- Excellent stability with long boring bars
- Adjust spindle speed while threading
- Excellent thread repair with thread pickup
- Machine is under power for inspection
- Very low hours, and in excellent condition
Video:
- https://rumble.com/v4fazw6-toolmex-tur-630a-mn3000.html
|