Machinery List

EDM - WIRE, CNC

2019 Mitsubishi MV1200-S Wire EDM, Machine # 9009

Mitsubishi MV1200-S Wire EDM - 5	Mitsubishi MV1200-S Wire EDM - 4	Mitsubishi MV1200-S Wire EDM - 6
Mitsubishi MV1200-S Wire EDM - 3	Mitsubishi MV1200-S Wire EDM - 2	Mitsubishi MV1200-S Wire EDM - 7
Mitsubishi MV1200-S Wire EDM - 1

Reference #:	9009
Machine Type:	EDM
Year:	2019
Manufacturer:	Mitsubishi
Model:	MV1200-S Wire EDM
Control:
Condition:	Used - Very Good
Under Power:	Yes
Code:	E2475
Table: Table Length: 25.2" Width: 17.7" Maximum Table Load: 1,102 Lbs Travels: X-Logitudinal: 15.7" Y-Cross: 11.8" Z-Vertical: 8.7" Taper U-V Travel: +/- 2.4" x +/- 2.4" Taper capacity: 15 degrees Rapid Table Feed: 51.2 IPM Tank: Capacity: 145 Power Supply: V350-V Wire: Wire Spool Capacity: 22 / 44 Wire Diameter Range: 0.004~0.012" Dimensions: Overall dimensions: 79.7" x 106.4" Weight: 5952 Lbs Compressed Air Requirement: 2.7 CFM@71~100 psi Equipped With: 20KG wire spool (44lb Spool floor cabinet) User Program Storage [Hard Disk Size] 1 GB [32 GB CFAST Card Size] Comments: 8,379 hours of use

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Superior Machinery claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.