2011 South Bend SB1058F Engine Lathe, Machine # 9007

Capacities:

• Swing ove bed: 18.11"
• Distance between centerrs: 80"
• Swing over cross slide: 11.02"
• Swing over saddle: 18"
• Swing over gap: 27.95"
• Maximum tool bit size: 1"
• Compound travel: 5.39"
• Carriage travel: 79"
• Cross slide travel: 11"

Headstock:

• Spindle bore: 3.15"
• Spindle taper: MT#7
• Number of spindle speeds: 16
• Range of spindle speeds: 20 - 1600 rpm
• Spindle type: D1-8 Camlock
• Spindle bearings: Tapered Roller

Main Motor:

• Type: TEFC Induction
• Horsepower: 15 HP
• Voltage: 440 V
• Phase: 3-Phase
• Amps: 19A
• Speed: 1720 RPM
• Cycle: 60 Hertz
• Power Transfer: V-Belt & Gear

Tailstock:

• Tailstock quill travel: 6.5"
• Tailstock Taper: MT#5
• Tailstock barrel diameter: 3"

Threading:

• Number of longitudinal feeds: 15
• Range of longitudunal feeds: 0.0015 - 0.0400 ipr
• Number of cross feeds: 15
• Range of cross feeds: 0.00075 - 0.0200 ipr
• Number of inch threas: 38
• Range of inch threads: 2 - 72 tpi
• Number of metric threads: 40
• Range of metric threads: 0.4 - 14 mm
• Number of midular pitches: 18
• Range of modular pitches: 0.3 - 3.5 MP
• Number of diametral pitches: 21
• Range of diametral pitches: 8 - 44 DP

Dimensions:

• Bed width: 13.58"
• Leadscrew diameter: 1-3/8"
• Leadscrew TPI: 4 TPI
• Leadscrew length: 105.08"
• Steady rest capacity: 5/8" - 7-1/16"
• Follow rest capacity: 5/8" - 5-1/8"
• Faceplate size: 14"
• Feed rod diameter: 0.93"
• Floor to center height: 45.08"
• Height with leveling jacks: 46.25"

Comments:

• Mint condition lathe that has never been powered up.