Specifications:
- Swing Over Bed: 30.7"
- Maximum Swing Over Carriage: 27.5"
- Maximum Machining Length: 35.4"
- Turning Diameter: 15.4"
- Turning Diameter Lower Turret: 11.8"
- Center Distance: 48.42"
- Chuck Size: 8"
- Bar Capacity: 2.6"
- X-Axis Travel (Upper / Lower): 10.6" / 36.2"
- Z-Axis Travel (Upper / Lower): 7.5" / 36.2"
- Y-Axis Travel: +/- 2.4"
- B-Axis Travel (Sub-Spindle): 36.2"
- C-Axis Index: 0.001 Degrees
Speeds:
- Rapid Traverse Rate (X & Z / Y): 945 / 472 IPM
Main Spindle:
- Nose: A2-6
- Speed: 5,000 RPM
- Motor: 30 HP
- Bore: 3.1"
Sub-Spindle:
- Chuck: 8"
- Bar Capacity: 2.56"
- Bore: 3.1"
- Nose: A2-6
- Speed: 5,000 RPM
- Motor: 33.5 HP
- C-Axis: 0.001 Degree
- Travel: 36.2"
Live Tools:
- Speed: 4,000 RPM
- Motor: 7.5 HP
Turrets:
- Capacity (Upper / Lower): 12 / 12
General:
- Dimensions: 172" x 86" x 101"
- Weight: 24.500 Pounds
Equipped With:
- Live Tooling & (Y-Axis on Upper Turret Only)
- Twin Spindle / Twin Turret
- Automatic Tool Pre-Setter for Upper & Lower Turrets
- Fanuc 18iTB CNC with 10.4" Color LCD - USB Port
- LNS Turbo HB Chip Conveyor (Side Exit Hinge Type)
- Assorted Longitudinbal and Axial Live Tool Holders
- Two (2) Hydraulic Chucks 8" Chucks
- (2) Royal Quick Grip 65 Collet Chucks for Main & Sub Spindle
- Auto Parts Catcher for Sub Spindle
- Servo Driven Turrets
- Bar-Feed Interface
- Rigid Tapping
- Remote Manual Pulse Generator
- (3) OD Live Holders (Eppinger)
- (3) Face Live Holders (Eppinger)
- (9) Boring Bar Holders
- (11) Turning Holders
- (10) Spindle Liners (0.5", 0.63", 0.75", 21mm, 0.87", 1", 28mm, 40mm, 45mm &
- 60mm ID) Approx.
- (26) Royal Quick Grip 65 Collets
- Slant Bed Box Way Construction
Comments:
- The machine runs fine except the stator on the upper turret needs to be rewound
- The bar feeder is not for sale
- 40,972 Power On Time
- 12,384 Operating Time
- 5756 Cutting Time
|
