Machinery List

EDM - WIRE, CNC

2004 Mitsubishi FA10SM, Machine # 8756

Mitsubishi FA10SM - 14	Mitsubishi FA10SM - 13	Mitsubishi FA10SM - 01
Mitsubishi FA10SM - 05	Mitsubishi FA10SM - 06	Mitsubishi FA10SM - 09
Mitsubishi FA10SM - 07	Mitsubishi FA10SM - 15	Mitsubishi FA10SM - 02
Mitsubishi FA10SM - 11	Mitsubishi FA10SM - 12	Mitsubishi FA10SM - 10
Mitsubishi FA10SM - 03	Mitsubishi FA10SM - 08	Mitsubishi FA10SM - 04

Reference #:	8756
Machine Type:	EDM
Year:	2004
Manufacturer:	Mitsubishi
Model:	FA10SM
Control:	Adaptive 64-Bit Controlle
Condition:	Used
Under Power:	??
Code:	E2475
Specifications: Machining Range: 13.7 x 9.8 x 8.6" Maximum Workpiece Dimensions: 31.4 x 23.6 x 8.4" Workpiece Weight: 1,100 Lbs Table Dimensions: 23.2" x 20.2" U/V Travel: 1.25" x 1.25" Resolution: .000002" Taper Angle: 15ø @ 4.0" Table Rapid Feed: 51.2 IPM Wire Diameter (.010" Standard): .004" - .012" Minimum Wire Thread Start Hole: .020" Maximum Workpiece AT Height: 8.6" Wire Tension: 50 - 2500 grams Wire Spooling Speed: 0 - 11.8 IPS Filter System: Paper Cartridge (2X) Filter Type / Precision: Type 7 / 3 micron Filter Tank Capacity: 116 Gallons Dielectric System Dimensions: 40.1 x 60.6 x 59.1" Dielectric System Weight (empty): 770 Lbs Machine Dimensions: 62.0 x 65.6 x 75.9" Machine Weight: 4,400 Lbs Equipped With: Submerged machining Automatic Wire Threader This machine was reported to be in good working condition when placed in storage approximately 10 years ago. To the best of our knowledge all details listed below are deemed correct. It is the buyers responsibility to confirm ALL details prior to purchase.

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Superior Machinery claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.