2005 Haas VF-2B, Machine # 8370

Table:

• Table Size: 36" x 14"
• Maximum Table Load: 3000 Lbs

Travels:

• X-Axis Travel: 30"
• Y-Axis Travel: 16"
• Z-Axis Travel: 20"
• Spindle Nose to Table: 4" - 24"

Spindle:

• Spindle Speeds: 7,500 RPM
• 24 + 1 Side Mount Tool Changer24 + 1 Side Mount Tool Changer: CT 40 Taper
• Main Motor: 20 HP
• Max Torque: 75 ft-lb @ 1400 rpm
• Max Torque w/opt Gearbox: 250 ft-lb @ 450 rpm

Tool Changer:

• Tool Changer Positions: 24 ATC
• Max Tool Diameter (full): 3.5"
• Max Tool Weight: 12 lb
• Tool-to-Tool (avg): 4.2 sec
• Chip-to-Chip (avg): 4.5 sec

Rapids:

• Rapid Traverse (X, Y & Z ): 1000 IPM
• Feed Rate: 650 IPM

Accuracy:

• Positioning (ñ): 0.0002"
• Repeatability (ñ): 0.0001"

General:

• Weight (approx.): 7000 lb
• Air Required: 4 scfm, 100 psi
• Coolant Capacity: 55 gal
• Power (options may increase requirement): 195-260 VAC/50 A
• : 354-488 VAC/30 A

Equipped With:

• Haas 32-Bit Control
• 24 + 1 Position Side Mount Tool Changer
• RS-232 Port
• Auger Conveyor
• Rigid Tapping
• 4th Axis Haas HRT 160 Rotary Table
• Expanded Memory (1MB)
• Quick Code Programming
• 3.5" Floppy Disk Drive & Interface (1.44 MB)
• Spindle Orientation
• Coordinate Rotating & Scaling
• Remote Jog Handle
• User Definable Macros
• 2-Speed Gearbox
• Programmable Coolant Nozzle
• Gear Driven

Comments:

• Video: https://rumble.com/v16cw06-haas-vf-2b-2005.html