Minster DAS-60-52 x 32, 1984, PRESSES, DOUBLE & TRIPLE ACTION

PRESSES, DOUBLE & TRIPLE ACTION

1984 Minster DAS-60-52 x 32, Machine # 6740

Minster DAS-60-52 x 32, Machine:6740, image:0
Minster DAS-60-52 x 32 Double Action Shell Press - 5
Minster DAS-60-52 x 32, Machine:6740, image:1
Minster DAS-60-52 x 32 Double Action Shell Press - 2
Minster DAS-60-52 x 32, Machine:6740, image:2
Minster DAS-60-52 x 32 Double Action Shell Press - 3
Minster DAS-60-52 x 32, Machine:6740, image:3
Minster DAS-60-52 x 32 Double Action Shell Press - 1
Minster DAS-60-52 x 32, Machine:6740, image:4
Minster DAS-60-52 x 32 Double Action Shell Press - 6
Minster DAS-60-52 x 32, Machine:6740, image:5
Minster DAS-60-52 x 32 Double Action Shell Press - 4
Minster DAS-60-52 x 32, Machine:6740, image:6
Minster DAS-60-52 x 32 Double Action Shell Press - 8
Minster DAS-60-52 x 32, Machine:6740, image:7
Minster DAS-60-52 x 32 Double Action Shell Press - 7
Reference #:6740
Machine Type:Presses
Year:1984
Manufacturer:Minster
Model:DAS-60-52 x 32
Control:
Condition:Good
Under Power:Yes
Code:P4153

Specifications:

  • Shut height, outer slide, stroke down, Adj. up on bed: 25"
  • Shut height, inner slide, stroke down, Adj. up on bed: 27.38"
  • Thickness of bolster plate: 5"
  • Area of slide, outer, R-L, F-B: 52" x 32"
  • Area of slide, inner, R-L, F-B: 28" x 16"
  • Area of bed, R-L F-B: 52" x 32"
  • Area of bolster, R-L F-B: 52" x 20"
  • Angular stroke displacement between the two slides,:
  • outer slide leads by 25 degrees:
  • Opening in bed, R-L, F-B: 40" x 12"
  • Strokes per minute: 100 - 200 SPM
  • Tonnage capacity of each slide is 30 tons at .25" up:
  • on stroke, 30 tons maximum on each slide:
  • Usable energy at 100 spm is 16.5 inch tons:
  • Diameter of crank shaft at man bearings: 5.5:
  • Stroke of slide (Outer slide): 3.5"
  • Stroke of slide (Inner slide): 4:
  • Adjustment of slide (Outer slide): 1"
  • Adjustment of slide (Inner slide): 1"
  • Upright opening: 16"
  • Size and speed of main drive motor: 40 HP at 1000 rpm

Comments:

  • This machine never got released to the can production world, it was
  • purchased new and used to prototype new dies and feed
  • systems. It has a Minster feed system for 209 blanking forms and the last 209
  • 10 out new die is still in the machine
  • To blank and draw #209 alum ends - 10 out.
  • Heavy duty high energy flywheel drive
  • The frame is of two piece unitized construction
  • Equipped with Minster Heavy Duty Hydraulic Operated Friction Clutch and Brake
  • Spring actualted caliper brake also engages if hydraulic pressure is lost


DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Superior Machinery claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.

Fill out Form for Instant Quote

Contact Information
Questions or Comments


 
Thank you for your interest
in Superior Machinery

Share:

Featured Machines