Capacity:
- Chuck Size: 8" 3-Jaw
- Sub-Spindle Chuck: 6" 3-Jaw
- Swing over bed: 30.7"
- Swing over saddle: 24.8"
- Recom. Turning diameter: 8.3"
- Max. Turning Diameter: 16.0"
- Max. Turning Length: 21.5 / 30.9"
- Bar Working Diameter: 2.6"
Travels:
- X-Axis: 10.2"
- Z-Axis: 23.2" / 32.7"
- B-Axis: 23.2" / 32.7"
Rapid Traverse:
- X-Axis: 1181.1 IPM
- Z-Axis: 1181.1 IPM
- B-Axis: 1181,1 IPM
Spndle:
- Speed (Belt Type): 4500 RPM
- Nose: ASA A2-6
- Spindle Bearing Diameter (Front): 4.7"
- Spindle through hole diameter: 3,0"
- Min. spindle indexing angle (C-axis): 0.001 Degree
- Motor: 33.5 / 24.8 / 20.1 HP
Turret:
- No. of tool stations: 12 / 12
- Rotary tool spindle speed: 5,000 RPM
Tailstock:
- Quill diameter: 3.1"
- Quill bore taper (Live): MT #4
Sub-Spindle:
- Speed (Belt): 4500 RPM
- Nose: ASA A2-5
- Bearing Diameter: 3.5"
- Through Hole Diameter: 2.4"
- Min. Indexing Angle: 0.001 degrees
- Motor: 10 / 7 HP
- Rotary Tool Spindle Motor: 7 HP
Machine:
- Height: 74.8"
- Length: 130.3 / 139.0"
- Width: 73.3"
- Weight: 5350 Lbs
Equipped With:
- Doosan Fanuc I Series
- 3 Jaw Chuck On Main
- 3 Jaw Chuck on Subspindle
- C-Axis On Main & Sub Spindles
- Sub Spindle
- Live Tooling
- 12 Position Turret
- Chip Conveyor
- Tool Presetter
- High Pressure Coolant ChipBlaster Available for an additional $3,900
Comments:
- Videp: https://rumble.com/v5s11ih-doosan-puma-2100ms.html
|
